We are engaged in offering antiblock masterbatches that are formulated using active ingredients. We also market our range of antiblock masterbatches under the brand name of 'SLABKON'. Further we are also engaged in offering slip and anti-block masterbatches for LDPE / LLD / PP Films as per the norms and standards of ISO.

Slip master batches for LDPE / LLDPE / PP Films :

We hold expertise in providing slip master batches for LDPE / LLDPE / PP films that are based on the migration characteristics. For this application, we provide these masterbatches in two types that are formulated using additive from fatty acid amide group. If an immediate lowering of co-efficient of friction is required, these masterbatches are formulated on fast migartion characteristic additives. In addition we also offer these masterbatches on slow migartion characteristics of the additive. Degree of COF and polymer type are the two parameters on which the concentration of these masterbatches depends.

 

 

Antiblock masterbatches for LDPE / LLD / PP Films

We are engaged in offering antiblock masterbatches for LDPE / LLD / PP Films, which comprises balanced slip. These masterbatches are based on the silica or mineral fillers and fatty amide additives. During the processing of these films, an antiblock masterbatch can be added in order to remove the blocking tendency of film surfaces.

We are engaged in manufacturing nucleating agent masterbatches that are added to the polymers in order to control the crystal structure. Further, this helps in producing a high degree of crystallizing with fine grain spherulite structure. Apart from this, it also increases optical properties like transparency, translucency and improves physio-mechanical properties. These masterbatches are manufactured using active ingredients our range of nucleating agent master batches is also used to enhance the processing and characteristics of end products like dimensional stability and post mold shrinkage. In addition, we also market our range of nucleating agent master batches under the brand name of 'NUKON'.

Our range of nucleating agent master batches is formulated using carefully selected organic compounds which are as follows:

• Salts of mono or polycarboxylic acids
• Long chain ester ionomer

We also provide antioxidant masterbatches that are formulated with the different loadings of active ingredients. These masterbatches are considered ideal for the specific needs of styrenics and polyolefins. Our rage of antioxidant masterbatches is also marketed under the brand name of “AOKON”.

Need of anti oxidant for polymer processing

During the processing at elevated temperature, all the polymeric material undergo thermal degradation in the presence of atmospheric oxygen. All the critical aspects should be kept in consideration in order to select antioxidant carefully. Degardation of polymers causes in the form of following:

•Changes in color

•Detrimental effects on physico mechanical properties

•Long term aging

Polymers are extensively used in automotive components, electronic goods, furniture, appliances & parts. For this, polymers should be protected from outdoor exposure. To assure this, antioxidants are added to polymers in order to protect them against thermal degradation process.

In addition, we also offer antioxidants in the following two forms:

• Primary antioxidants

• Secondary antioxidants

Primary antioxidants:

We also hold expertise in offering primary antioxidants that are used to prevent degradation by destroying free radicals. These radicals have been generated during the degradation of polymers. The primary antioxidants offered by us include hindered phrnois and amines.

Secondary antioxidant:

We also provide Secondary Antioxidant that are used to decompose the hydroxide. This has been formed during the reaction of primary antioxidant with free radicals. Therefore, secondary antioxidants can also be used synergically with primary antioxidants. Examples of secondary antioxidants are sulphide, thioesters, phosphates and many more.

Application areas:

Our range of Antioxidant Master batches is extensively used in the following application areas:

Melt stabilization of polypropylene

Owing to the tertiary hydrogen in its structure, polypropylene is considered sensitive to oxidative degradation. By producing lower molecular weight resin with enhancement in melt index and lower physical properties, chain scission results in being the primary outcome of the oxidative degradation.

Melt stabilization of controlled rheology ( CR ) PP

Controlled rheology is uses a peroxide cracking agent to indicate that Polypropylene has been subjected to post polymerization compounding process. Further, this results in the modification of molecular weight distribution and helps in increasing in the melt flow and Polypropylene resin properties for different applications like fiber spinning and injection molding. Careful selection of antioxidant is of utmost importance in order to have an effective control on the melt stabilization of controlled rheology Polypropylene. Further, antioxidant also forbid increase in the melt flow which has been caused due to the peroxide cracking agent.

Melt stabilization of HDPE / LLDPE

The melt index of HDPE/ LLDPE decreases during the multiple extrusion. Through careful selection of antioxidant excellent melt stabilization activity van be achieved.During multiple passes antioxidant should also provide efficient control on the colors that is yellow index of polymer

Polypropylene fibers

The reactivity of nitrogen oxide generated by combustion of natural gases results in the following:

• Gas yellowing of polyproplyene fibers

• Extraction of additives of the fibers by lubricant components in the spin finish

We also hold expertise in providing UV stabilizer masterbatches that find application in PP Fibres, rotational molding, green house. These are also extensively used for high density and PP consumer application, automotive applications and LDPE Films. Our range of UV stabilizer masterbatches is also marketed under the brand name of 'UVKON'.

U.V. master batches for PP fibres :

We also hold expertise in offering UV masterbatches for PP fiber applications. PP fibers are also suitable for domestic as well as industry applications. These are also counted amongst the most color fast and naturally stain resistant fibers. PP fibers also find its application in the following:

• Outdoor carpets
• A wings
• Umbrellas
• Interior automotive fibers

U.V. master batches for rotational molding

We are also engaged in providing UV masterbatches for rotational molding that are used in maintaining the physical and surface appearance of ROTO molded products. Based on HALS, the active ingredients of these masterbatches is sanctioned by BGVV and FDA. In addition, ROTO molded tanks are exposed to maximum UV rays and also find application in outdoors for elongated periods. These tanks have to be necessarily UV stabilized and also come in contact with water.

U.V. stabilizer master batch for green house

We also hold expertise in providing UV stabilizer masterbatches/ agriculture films, which hold the capability to withstand extreme weather conditions and various agriculture like pesticides. These masterbatches are also based upon the high molecular weight polymeric HALSUV. Our clients can also avail from us these masterbatches with or without Pesticide resistance as per their requirements. During the processing of agriculture films, our range of UV stabilizer master batches for green house also provide stabilization against oxidation.

U.V. master batches for high density and polypropylene polyethylene consumer application

We are also engaged in manufacturing and supply of U.V. masterbatches for high density & Polypropylene Polyethylene. Where appropriate UV stabilization is necessary to ensure the durability of product, these high density polyethylene masterbatches are extensively used in consumer applications. Some of the applications are as follows:

• Bottle
• Fruit crates
• Fresh cans
• Toys
• Spring
• Leisure goods
• Sporting goods
• Furniture
• Containers

U.V. masterbatches for automotive applications

We offer a quality range of U.V. masterbatches for automotive applications that are used for color consistency and maintenance. These masterbatches also find application in the retention of physical properties of molded part during end use. Our range of U.V. masterbatches is molded in color and impact modified polypropylene and is extensively used in the following automotive applications:

• Bimpers
• Interior trims
• Exterior trims
• Our range of U.V. masterbatches for automotive applications is also used for the following :
• Color critical applications
• Providing greater light and process stability
• Color consistency & maintenance
• Retention of physical properties of molded part during end use

We are also engaged in offering an extensive range of antiStatic masterbatches that are manufactured as per the ISO norms and standards. These masterbatches find application in electronic appliances and their parts. In addition, we market our range of anti static masterbatches under the brand name of 'ASKON'. Our range of comprises the following:

Anti-static master batches for appliance parts

Since the components used in manufacturing of appliances parts like washing machines and refrigerator should not attract any dust particles. Owing to accumulation of static charges, these components should be free from dust. In order to minimize this, we offer Anti-static masterbatches for appliance parts. These anti-static masterbatches is formulated using anti-static agents, which slightly induce the conductivity of the components . Further, this helps in removing constant charges without affecting aesthetics of the components including charity.

Anti-static master batches for electronic applications

We are engaged in providing Anti-static master batches for electronic applications that are applicable for relatively humidity conditions. These masterbatches are based on amine derivative agents and are extensively used in polymer components of electronic applications, where constant charges can result in electronic discharge. For example when films come in contact with sensitive electronic equipment during the packaging and storage of electronic components in a plastic bin for longer period can damage the product. In addition, these masterbatches are also available in loadings of 10%.

We also hold expertise in offering processing aid masterbatches, which are formulated using ploymetric type additives that comprises multiple features. During the execution process, these batches also help in processing of narrow molecular weight high melt viscosity polymers. In addition, our range of processing aid masterbatches is also useful for the following purposes:

• Molding of extremely large surface area components having longer flow paths
• To reduce weld lines
• To eliminate molded 'n' stresses
• Warpage
• Better mold filling with improved surface properties
• Better mold releasing properties

Our range of processing aid masterbatches is available in the concentration of 10% and is also marketed under the brand name of 'PAKON'.

We are also engaged in offering functional masterbatches that are extensively used for automotive applications. These applications are based on UV Stabilizers and antioxidants. We also hold expertise in offering ready to use direct compounds that find its application directly in the molding.

Automotive compounds:

The polymers which are extensively used in automotive application should have a high level of aesthetic appeal as well as balanced physio mechanical properties. The performance requirements of plastics are continuously enhancing by automotive companies. In longer times to failure of polymer components are specified, consequentially higher performance are being set.

Polymers:

Polymers are used for manufacturing different types of automobile parts. For example PP/EPDM alloys are used for bumper, Polypropylene is used for dash boards and for talc filled Polypropylene is used.

Colors:

The ingredients used for coloring automotive components should not have any affect on the polymer aging properties. Carbon black is used to maintain the Grey color of automotive components, thereby minimizing the aging properties of polymer. Unless talc is properly stabilized with different functional additives these are used to increase the mechanical properties of basic polypropylene.

We also hold expertise in offering combi concentrates of color and functional additive master batches in order to achieve the aesthetic and desired aging properties.These amsterbatches are used in the following applications:

•Storage tanks

•Industrial components

•Carry bags

•Woven sacks

Box strapping:

•Green house